[. . . ] It is recommended that a separate circuit serving only this appliance be provided. [. . . ] Drain System Options Standpipe drain system - wall or floor (views A & B) The standpipe drain requires a minimum diameter standpipe of 2" (50 mm). The top of the standpipe must be at least 30" (762 mm) high and no higher than 96" (2. 4 m) from the bottom of the washer. OVERALL DIMENSIONS Washer dimensions 501/4" (1276 mm) 27" (686 mm) Custom undercounter installation-washer only 2" (50 mm) 36" min. (914 mm) 36" (914 mm) 1" (25 mm) 27" (686 mm) 1" (25 mm) 301/2" (775 mm) For closet installation, with a door, the minimum ventilation openings in the top and bottom of the door are required. Louvered doors with equivalent air ventilation openings are acceptable. 30" min. (762 mm) 3" (76 mm) 9" (229 mm) 3" (76 mm) 24 in. (155 cm2) 1" (25 mm) 12" (305 mm) 2* C D 1" 27" 311/2" (25 mm) 4" 1" (102 mm) (800 mm) (25 mm) (686 mm) 72" (1829 mm) (133 mm) 51/4"** 1"*** (25 mm) 27" (686 mm) 1"*** (25 mm) * Min. *** Wall, door, and floor molding may require additional spacing. Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice. Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product. [. . . ] *** Wall, door, and floor molding may require additional spacing. Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice. Dimensions are for planning purposes only. [. . . ]